Pneu-Tek Lubrication Systems Fittings Male Connector Single O-ring with Normal Collar withstand 350 Bar Working Pressure.
Cixi Pneu-Tek Lubrication Systems Fittings Male Connector , Staight Male Connect ,Push in Type , Lubrication Systems Push-in Fittings ,AJPC04-M6*1 ,Weight :4.90g,Height:21.00mm,Hex:S 8.00mm, Thread Length: 5.00mm,Push to Straight Male Connector ,Material: Brass & Nickel-Plated ,Single O-Ring:A Class NBR Material ,Max Pressure:2175 PSI/150 Bar.
Threads Avaliable : M4*0.75 ,M5*1,M6*0.75,M6*1,M8*1,M10*1,M10*1.25.
Tube: Nylon, Polyamide, Polyethylene, Polyurethan,Stainless Steel Tube.
Diameters: ∅ 4 - ∅ 6.
Working Media: Oil, grease,Working temperature: -20°C ÷ +80°C.
The Pneu-Tek Lubrication Systems Fittings Male Connector for oil and grease with below benefits:
Comparing with Brass Compression Fittings ,The lower cost for its assembly without any tools.
The considerable time savings upon assembly to reduce the maintenance cost
Fast clamping of tube into fitting drastically reduces assembly time and assembly cost.
Easily assembled and disassembled; there is no wear or damage to the tubes as previously experienced with conventional & push-in fittings.
In order to choose the best suited fitting in your centralized lubrication system, a few basic criteria must be taken into account: Operating pressure and temperature, dimensions, and option of exchanging.
Please note!
We, as manufacturer of fittings for centralized lubrication systems, for safety reasons that all fitting assembly should only be done by trained professionals.
Leave a message for product
