Pneu-Tek Centralized Lubrication Systems Fittings Swivel Elbow @ 400bar
Cixi Pneu-Tek High Pressure Centralized Lubrication Systems Fittings Swivel Elbow , Model:BLPL04-M10*1 ,Weight :32.00G,Height:25.00mm,Hex:S 15.00mm, Thread Length: 5.00mm,Push to Swivel Elbow Male Connector ,Material: Brass & Nickel-Plated ,Single O-Ring:A Class NBR Material ,Max Pressure:2175 PSI/150 Bar,Threads: M4*0.75 ,M5*1,M6*0.75,M6*1,M8*1,M10*1,M10*1.25. Tube: Nylon, Polyamide, Polyethylene, Polyurethan,Stainless Steel Tube, Diameters: ∅ 4 - ∅ 6,Working Media: Oil, grease,Working temperature: -20°C ÷ +80°C.
The Pneu-Tek High Pressure Centralized Lubrication Systems Fittings Swivel Elbow with below benefits:
Comparing with Brass Compression Fittings ,The lower cost for its assembly without any tools.
The considerable time savings upon assembly to reduce the maintenance cost
Fast clamping of tube into fitting drastically reduces assembly time and assembly cost.
Easily assembled and disassembled; there is no wear or damage to the tubes as previously experienced with conventional & push-in fittings.
In order to choose the best suited fitting in your centralized lubrication system, a few basic criteria must be taken into account: Operating pressure and temperature, dimensions, and option of exchanging.
Please note!
We, as manufacturer of Centralized Lubrication Systems Fittings Swivel Elbow for centralized lubrication systems, for safety reasons that all fitting assembly should only be done by trained professionals.
Cixi Pneu-Tek a professional manucaturer of Centralized Lubrication Systems Fittings Swivel Elbow for Lubrication Industrial in China .
Leave a message for product