Brass Nickel Plated Push In Fittings Swivel Elbow

Click to enlarge

If you are interested in this product, you can

Product Name: Brass Nickel Plated Push In Fittings Swivel Elbow

Product Model: BPL8-02

Exhibitors: Pneu-Tek

Product Documentation: No Related Documents

A brief introduction

Brass Nickel Plated Push In Fittings Swivel Elbow (90 Degrees Swivel Male Elbow,Brass N.P)

Brass Nickel Plated Push In Fittings Swivel Elbow A detailed description of

Brass Nickel Plated Push In Fittings (90 Degrees Swivel Male Elbow,Brass N.P)

Pneu-Tek Brass Nickel Plated Push In Fittings Swivel Elbow , BPL10-1/4" ,90 Degree Swivel Male Thread Elbow ,10mm Tube OD x 1/4" BSPT Male.Collet Material: H59 brass ,Hex Size:S 14mm, Material of Construction: Nickel Plated Brass, Pressure (PSI) 1000, Temp Range: -20 To 100 Deg , weight : 33.00g,Height: 35.00mm,Nickel Thickness: 10um, O-ring: NBR-A , Thread Length: 9.50 mm,Package Quantity 25Pcs/Bag.

Characteristics:The Brass Collet is slot structure ,which is milled by Auto-CNC Machines to assure the even distance between the tooth to tooth.This way can guarantee the precision & sharp claw to catch the tube hose firmly & steadily. The Tee Connector ,Elbow ,Y Connector and Banjo Fittings are being forged with high compactness to avoid the space inside the solid fittings'body, The Polished Surface Treatment on the Forged fittings to wipe off the burr, spot and oil,the good character is the high adhesive power of nickel plating on its Surface.

Caution:The repeatly connectting or disconnectting the Nylon or PU Hose intoBrass Nickel Plated Push In Fittings Swivel Elbow ,which will cause the Scratches covered with Nylon or PU Hose.The direct result is leakage on fittings, the correct way is cut off the scratched Nylon or PU Hose end and insert it again to avoid the leakage.

Features: Tube connection and disconnection can be repeated and peformed with one hand ,no tools required .Nickel Plated body is anti-corrosion ,anti- contamination& UV protection .Working Media" Air ,Water and Lubrication Oil. Shpes: Male Studs ,Femal Studs ,Male Stud Swivel Elbow,Female Bulkhead Connector ,Female Swivel Elbows Speed Control Valves ,Staright Union ,Equal Elbow , Equal Tee, Y Connector,Swivel Branch Tee and Run Swivel Tee .

Recommended Tube Material and Tube Size Tolerance Requirements:

Polyurethane Tube: specified fitting size ± 0.004" max. (± 0.1 mm max.)

Nylon Tube:: specified fitting size ± 0.004" max. (± 0.1 mm max.)

Pneu-Tek Brass Nickel Plated Push In Fittings Swivel Elbow are the highest quality Pneumatic Fittings manufactured by PNEU-TEK Pneumatics.

http://www.pneu-tek.com http://www.pneumatic-vibrators.com

Leave a message for product

Title

Contact

Tel

Content

Verify Code

Click to change

Note：1. Shortcut key for send message :Alt+s or Ctrl+Enter!
2. If necessary, please leave your detail contact!